Commercial VHF Analog Mobile Radios with LCD Display, GPS, and Optional Bluetooth
The MD622i is a cost-effective Analog mobile radio that delivers value with extensive features. Providing long-range transmission, robust design, and clear voice transmission, this compact mobile radio can be used in a variety of applications. MD622A Mobile Radio Applications:
- School Transportation
- Towing
- Taxis
- Ambulance and EMT
- Agriculture
- Construction
- Delivery Services
EMERGENCY BUTTON
VOLUME
AUDIO/PROGRAMMING PORT
LCD STATUS DISPLAY
PROGRAMMABLE BUTTONS
CHANNEL SELECTOR
POWER
INTERNAL SPEAKER
RF ANTENNA PORT
DC POWER SUPPLY REQUIRED
DB26 ACCESSORIES PORT
GPS PORT
Functions
INCREASED COVERAGE RANGE
With a high RF power output up to SOW, MD622A can dramatically enlarge your communication range.
HIGH CAPACITY CHANNELS
Support up to 512 analog channels to manage your daily work.
EMERGENCY ALARMS
Emergency Alarms can be sent to other radios via the one touch emergency button. mproves worker safety and emergency
ANALOG SIGNALING
Support DTMF and HDC1200 signaling in analog mode.
EMERGENCY ALARM/CALL
Use the orange emergency button to initiate an emergency
alarm and call to other radios.
BUILT-IN BLUETOOTH (Factory Optional)
Built-in Bluetooth supports MD622A to have wireless audio accessories and external PTT device connected.
Standard Accessories for MD622A Analog Mobile Radio
Audio
SM11A1
Handheld Microphone
IP54 compliant handheld microphone, providing high quality and reliable communication in challenging environments.
Charger
PWC10
DC Power Cable (10ft)
10ft (3M) DC power cable for mobile radios
Installation
BRK29
Mounting Bracket
Mounting Bracket for MD61x
Optional Accessories for MD622A Analog Mobile Radio
Audio
SM11A1
Handheld Microphone
IP54 compliant handheld microphone, providing high quality and reliable communication in challenging environments.
SM09D1
External Speaker (15W) with DB26 pin audio port
External speaker with clear voice output and adjustable bracket, to be used with mobile radios (15W). This is mountable on a horizontal or vertical surface and has an adjustable bracket.The large speaker with high output power provides clear audio even under noisy environments. DB26 pin audio port.
SM09D2
External Speaker
External speaker with clear voice output and 16.4 ft (5m) cable
POA121
Bluetooth Ring PTT
The wireless PTT ring is designed for finger wearing and allows you to trigger PTT functions without holding a portable radio in your hands.
POA44
Footswitch (External PTT)
Slip-resistant operation with the PTT function via footswitch to be used with Hytera mobile radios
Antenna
POA134
External GPS Module
External GPS Module
GPS04
Vehicle GPS Antenna
Vehicle GPS Antenna (SMA,1575MHZ)
Charger
PWC03
AC POWER CORD
AC POWER CORD
PWC10
DC Power Cable (10ft)
10ft (3M) DC power cable for mobile radios
PWC12
DC Power Cable (5M)
5 Metre DC power cable for mobile radios
PS22002
External Power Supply (300W)
300W external power supply for mobile radios and repeaters
DC-MD61X
Desktop Cabinet
Desktop Cabinet for MD78Xi with SEC1223 Power Supply 120VAC, Output 13.8VDC, 23Amps
Installation
BRK29
Mounting Bracket
Mounting Bracket for MD61x
Programming
PC109
Programming Cable
Programming Cable (CPS programming and firmware upgrading)
PC60
Ignition Cable
Ignition cable connected to the rear of mobile radio, enabling the radio to switch on and off automatically in vehicles (ignition sense)
DMR Extended Warranty
DMR Extended Warranty
DMR Extended Warranty
Extended warranty adds 2 years to the standard 3 year Hytera DMR product warranty for a total of 5 years of warranty protection.
Systems that work with MD622A Analog Mobile Radio
Technical Specifications
| Frequency Range | VHF: 136-174 MHz |
| Channel Capacity | 512 Channels |
| Zone Capacity | 6 Zones |
| Channel Spacing | 25/12.5kHz |
| Operational Voltage | 13.6 V ±15% |
| Weight | 1100g (2.4 pounds) |
| Dimensions | 6 15/32” x 1 11/16” x 1 15/16” (164 x 43 x 150 mm) |
| Frequency Stability | 0.5ppm |
| Antenna Impedance | 50Ω |
| LCD Display | 128x64 pixels, 1.5 inch, 4 lines |
| Analog Sensitivity | 0.3μV ( 12dB SINAD); 0.22μV (Typical) ( 12dB SINAD); 0.4μV ( 20dB SINAD) |
| Adjacent Selectivity | TIA-603: 60dB @ 12.5kHz, 70dB @ 25kHz ETSI: 60dB @ 12.5kHz, 70dB @ 25kHz |
| Spurious Response Rejection | TIA-603: 70dB @ 12.5/25kHz ETSI: 70dB @ 12.5/25kHz |
| Intermodulation | TIA-603: 70dB @ 12.5/25kHz ETSI: 65dB @ 12.5/25kHz |
| Hum and Noise | 40dB @ 12.5kHz, 45dB @ 25kHz |
| Rated Audio Power Output | Internal (@ 16 ohm load): 4W External (@ 8 ohm load): 8W |
| Max. Audio Power Output | Internal (@ 16 ohm load): 6W External (@ 8 ohm load): 12W |
| Rated Audio Distortion | ≤3% |
| Audio Response | +1 to -3dB |
| Conducted Spurious Emission | <-57dBm |
| RF Power Output | VHF High Power: 5-50W UHF High Power: 5-45W |
| FM Modulation | 11K0F3E @ 12.5kHz 16K0F3E @ 25kHz |
| 4FSK Digital Modulation | 12.5kHz Data Only: 7K60FXD 12.5kHz Data and Voice: 7K60FXW |
| Conducted/Radiated Emission | -36dBm 1GHz |
| Modulation Limiting | ±2.5kHz @ 12.5kHz ±5.0kHz @ 25kHz |
| FM Hum and Noise | 40dB @ 12.5kHz, 45dB @ 25kHz |
| Adjacent Channel Power | 60dB @ 12.5kHz, 70dB @ 25kHz |
| Audio Response | +1 to -3dB |
| Audio Distortion | ≤3% |
| Digital Vocoder Type | AMBE++ |
| Digital Protocol | ETSI-TS102 361-1,-2,-3 |
| Operating Temperature | 22oF to +140oF (-30oC to +60oC) |
| Storage Temperature | -40oF to +185oF (-40oC to +85oC) |
| ESD | IEC 61000-4-2 (Level 4)±8kV Contact, ±15kV Air |
| Dust and Water Ingress | IP54 Standard |
| Humidity | Per MIL-STD-810 C/D/E/F/G Standard |
| Shock and Vibration | Per MIL-STD-810 C/D/E/F/G Standard |