H-Series Professional DMR Digital 1U Repeater with Advanced Networking and Tier III Trunking
The Hytera HR1062 H-Series DMR Repeaters are the next-generation in creative style and functionality that elevates the industry standard in professional two-way radios.
The HR1062 is the new state-of-the-art in digital radio communications, providing a more efficient experience with loud and clear audio, support for multiple types of radio and communications systems, and extended range.
The HR1062 features AC and DC auto-switching power, two simultaneous TDMA voice channels, high performance cooling, and all in a compact 1U form factor.
COMPACT 1U FORM FACTOR
AUDIO AND PROGRAMMING PORT
OPERATION STATUS
TX ANTENNA
ACCESSORY PORTS
RX ANTENNA
ETHERNET PORTS
AC POWER
LONG-LIFE VARIABLE SPEED FAN
Functions
COMPACT 1U FORM FACTOR
The 1U height is half that of conventional repeaters, and the HR1062 features a in-built power supply to save valuable rack space.
ANALOG & DIGITAL AUTO SWITCH
Mixed channel mode detects the receiving signal and automatically switches between analog and digital mode to provide a simple migration path.
WIDE COVERAGE
Enhanced Rx sensitivity extends communication range, and an Ethernet port provides access to IP networks to enable remote site connectivity.
HIGHER SECURITY
The HR1062 supports Digital End-to-End and Overthe-Air Encryption. This optional software-based encryption uses the secure and reliable ARC4 and AES encryption algorithms.
AC/DC AUTO SWITCH
The HR1062 supports AC/DC auto switching for locations with different power sources, power redundancy, and eliminates the cost and space required for power adapters.
RELIABLE OPERATION
Variable speed fan provides optimal cooling with front to back internal airow, combined with high quality components to ensure 100% duty cycle operation for mission critical applications.
DMR - 2 TDMA 2 TIME SLOTS
TDMA digital technology provides 2 simultaneous voice channels that improves efficiency and doubles capacity without an extra frequency.
Standard Accessories for HR1062 DMR Repeater
Charger
PWC11
DC Power Cord
DC Power Cable red/black 10A 12AWG 3000mm
Optional Accessories for HR1062 DMR Repeater
Audio
SM09D1
External Speaker (15W) with DB26 pin audio port
External speaker with clear voice output and adjustable bracket, to be used with mobile radios (15W). This is mountable on a horizontal or vertical surface and has an adjustable bracket.The large speaker with high output power provides clear audio even under noisy environments. DB26 pin audio port.
SM10A1
Table Microphone with Large PTT
Table microphone with large PTT and lockable monitor key enabling convenient and efficient operation
SM16A1
Portable Microphone (IP54)
IP54 compliant portable microphone with 10-pin aviation connector to be used with mobile radios
SM16A2
Portable Microphone (IP67)
Rugged, reliable and IP67 compliant portable microphone ensures excellent peformance in challenging environments. For use with repeater and mobile radios
Charger
PS22002
External Power Supply (300W)
300W external power supply for mobile radios and repeaters
PWC03
AC POWER CORD
AC POWER CORD
PWC31
Power Cord
12AWG 2pin red/black power cord, 600V AWM UL1015, 3.165m (10.4 Ft)
Installation
BRK12
Installation Kit for Power Pack (Black)
Installation of up to two external power packs (PS22002) in a 19″ equipment rack
Programming
PC110
back-to-back cable
HM782 to HR1062 back-to-back cable for analog to digital cross or UHF to VHF cross (audio & control lines), DB26 to DB26, length 60cm (23.6 in).
PC142
Wireless Link Back-to-Back Cable
HM782 to HR1062 back-to-back cable for wireless link applications (data link), DB9/M to DB26/M, 1m
PC37
Programming Cable
Programming cable for mobile radios and repeater
PC40
Programming Cable (DB26/USB)
Programming cable with DB26 plug for mobile radios and repeater
PC49
Back-to-Back Data Cable
Back-to-Back data cable for mobiles and repeaters
POA147
Backup Cable
HM782 to HR1062 back-to-back cable, DB26 to DB26.
PC47
Programming cable (USB) with toggle switch
Programming cable with toggle switch to use with mobile radios and repeaters
Systems that work with HR1062 DMR Repeater
Systems
XPT Extended Pseudo Trunk
Single-site and Multi-site Extended Pseudo Trunking (XPT)
DMR IP Site Connect
Connect Repeater Sites with IP Networks
DMR Tier III
Digital Radio Trunking Systems
SmartOne DMR Dispatch
Unified Communications and Dispatching
Technical Specifications
| Frequency Range | UHF 400-470MHz , VHF 136-174MHz |
| Channel Capacity | 64 Channels |
| Channel Spacing | 12.5kHz / 20kHz / 25kHz |
| Operational Voltage | DC: 13.6V ±15% AC: 100-120V |
| Current Consumption | DC: Standby ≤0.9A, Transmitting ≤12A AC: Standby ≤0.35A, Transmitting ≤1.2A |
| Weight | 17lb 10oz (8.0 kg) |
| Dimensions (HxWxD) | Standard 1U: 13/4” x 19” x 143/4” (44 x 483 x 366mm) |
| Frequency Stability | ± 0.5ppm |
| Antenna Impedance | 50Ω |
| Duty Cycle | 100% |
| Networking | Conventional Mode, MPT and XPT Trunking, Tier III Trunking Upgrade Capability, *Digital Trunking Lite (*coming soon) |
| Digital Sensitivity | 0.2μV (BER5 5%) 0.18μV (Typical)/BER 5% |
| Analog Sensitivity | 0.16μV (Typical) (12dB SINAD) 0.18μV (12dB SINAD) |
| Adjacent Selectivity | TIA-603: 65dB@12.5kHz, 75dB@20/25kHz ETSI: 60dB@12.5kHz, 70dB@20/25kHz |
| Spurious Response Rejection | TIA-603: 80dB@12.5/20/25kHz ETSI: 80dB@12.5/20/25kHz |
| Intermodulation | TIA-603: 75dB@12.5/20/25kHz ETSI: 70dB@12.5/20/25kHz |
| Blocking | 90dB |
| Hum and Noise | 40dB@12.5kHz, 43dB@20kHz, 45dB@25kHz |
| Rated Audio Distortion | ≤3% |
| Audio Response | +1 to -3dB |
| Conducted Spurious Emission | ≤1GHz: 1GHz: ≤-47dBm |
| RF Power Output | 5-50W adjustable |
| FM Modulation | 11K0F3E @ 12.5kHz 14K0F3E @ 20kKh 16K0F3E @ 25kHz |
| 4FSK Digital Modulation | 12.5kHz Data Only: 7K60FXD 12.5kHz Data and Voice: 7K60FXW |
| Conducted/Radiated Emission | Operating: ≤1GHz: -36dBm >1GHz: -30dBm Standby: ≤1GHz: -57dBm >1GHz: -47dBm |
| Modulation Limiting | ±2.5kHz @ 12.5kHz ±4.0kHz @ 20kHz ±5.0kHz @ 25kHz |
| FM Hum and Noise | 40dB @ 12.5kHz, 43dB @ 20kHz, 45dB @ 20/25kHz |
| Adjacent Channel Power | 60dB @ 12.5kHz, 70dB @ 20/25kHz |
| Audio Response | +1 to -3dB |
| Audio Distortion | ≤3% |
| Digital Vocoder Type | AMBE+2TM |
| Digital Protocol | ETSI-TS 102 361-1,-2,-3 |
| Operating Temperature | -22°F to +140°F (-30°C to +60°C) |
| Storage Temperature | -40°F to +185°F (-40°C to +85°C) |
| HR1062-U1 | DMR Repeater UHF 400-470MHz, 5-50W, DMR Tier II & Analog Conventional Mode |
| HR1062-V1 | DMR Repeater VHF 136-174MHz, 5-50W DMr Tier ll & Analog Conventional Mode |