RD982i-S
Professional DMR repeater for large radio networks
The Hytera RD982i-S is an impressive digital systems repeater. Supporting conventional analog and digital modes, it can also be used in DMR trunked radio systems (Tier III), and with up to 50W power is responsible for delivering excellent coverage in DMR simulcast and Hytera XPT systems.
Owner's Manual:
Hytera RD982i RD982i-S RD982i-S 100 W Digital Repeater Owners Manual
Highlights
Comprehensive Network
All the repeaters from Hytera can be connected in digital mode via IP connection for multi-site requirements. Both in conventional analog and DMR modes (DMR Tier II), the RD982S repeater can be used with the RD622i and RD962i repeaters to create an impressive network
Upgrade and Expand
The RD982i can be upgraded into a base station for DMR simulcast, DMR trunked radio or Hytera XPT radio systems, making it a secure investment for growing radio projects
Maximise Capacity
Thanks to the TDMA technology, twice as many users can use the same channel. With frequency scarcity, this represents an important relief and reduces the expense of system terminals and licenses
Professional Design
Integrated LEDs complement the sleek repeater design, while the integrated fan assembly provides high cooling capacity. Created with an intuitive interface, clear menus and the large navigation controller ensure it's simple to use
Secure Communication
Offering advanced digital encryption function, the RD982S can switch independently between digital and analogue modes, yet always ensuring the signal is protected
Functions
Mixed Mode Operation
YES
IP Site Connect
YES
Number of Sites
4 sites (R7.06 firmware) 8 sites (R8.0 firmware)
Multi-Site XPT
RD982i-S with R7 firmware & above (requires chargeable license)
Wall Mounting
Optional bracket available
Digital Encryption
Basic encryption as standard (10, 32 & 64 character keys). 40 bit Enhanced Encryption as Standard (R7.5 firmware)
Pseudo Trunking in DMO and RMO
YES (Hytera patented technology)
Single Site XPT
RD982i-S with R7 firmware & above (requires chargeable license)
Accessories for RD982i-S
Included as standard with RD982i-S
Installation
Programming
Audio
Charger & Power
Systems that work with RD982i-S
DMR System
DMR Applications
Technical Specifications
General
- Frequency Range
- VHF: 136-174MHz UHF1: 400-470MHz UHF2: 450-520MHz UHF3: 350-400MHz
- Channel Capacity
- 16
- Digital Protocol
- ETSI-TS102 361-1,2 & 3
- Supply Voltage
- DC +13.6v ± 15%
- Battery Backup
- YES via PSU
- Integral Battery Charging
- YES via PSU
- Dimensions(W×H×D)
- 88 x 483 x 366 (mm)
- Weight
- 8.5Kg
- Display
- 2.0'' 4 rows 160*128 pixels 262200 colours
- Programmable Buttons
- 4
- TX Aerial Connector
- N-type socket
- RX Aerial Connector
- N-type socket
- Internal Duplexer
- YES using optional mounting kit
Environmental Specifications
- Dust & Water Intrusion
- IP54 Standard
Features
- 19" Rack Mounting
- YES (2U required)
- Back Pack
- NO
- Multiple CTCSS/ CDCSS
- YES
- Repeater Knockdown
- YES (Analog & Digital)
- IP Ports
- 1
- GPS
- NO
- Telemetry
- YES
- IP Site Connect
- Digital - YES Analog - YES (R8.5 firmware)
- Audio Output for Slot A & B
- YES
- Remote Programming
- YES via IP interface
- Remote Diagnostic & Control
- Software available
- Emergency Mode
- NO
- Lone Worker
- NO
- Mandown
- NO
- Priority Scan
- YES
- Digital Encryption
- Advanced encryption (Hytera or DMRA 128 bits and 256bits AES) available via chargeable licence file.
- Multiple Key Encryption Decode
- YES
- Multilanguage Menu
- YES
- Power on & off user logo programming
- YES
- Voice Interrupt
- Yes (latest firmware required and Smart Dispatch V4.5.6)
- Text Messaging
- Yes via application software
- Quick Text Messages
- Up to 25 pre-programmed via CPS (for telemetry use)
- MPT1327 / 1343 Trunking
- RD982s Operating mode to be specified with order
- Tier 3 Trunking
- RD982s only via firmware upgrade
- Over-the-Air Programming
- NO
- Analogue Only Version
- Not Available
- Number of Sites
- 16 sites (latest firmware required)